Antennas; Cord - Philips HTS3000 User Manual

Basic Connections (continued)
Step 4: Connecting the
FM and AMIMW
antennas
@ Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
0 Connect the supplied
FM antenna
to the
FM 75 _ socket.
Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
- Adjust the position of the antennas for
optimal reception.
- Position the antennas as far away as
possible from your T¼ VCR or other
radiation source to prevent any unwanted
interference.
Step
5:
Connecting the
power cord
_OteS;
- For power supply rating, refer to the
rear or bottom of the main unit.
- Turning off to standby mode does not
disconnect the unit from mains.
Connect the AC power cord to the
power outlet.
÷ The standby LED on the main unit
lights up.
Helpful Hint:
- Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
16