Philips HTS3000 User Manual page 21

@
Getting Started (continued)
Setting up Progressive Scan
feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of fi'ames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
Ensure that you have connected this unit
to a progressive scan TV using the
Y Pb Pr connection (see _Option 2:
Connecting to a Progressive Scan TV or
component video input').
Turn on the TV to the correct viewing
channel for this unit.
.... _ Make sure that the TVs progressive
scan mode is turned off (or set to
interlaced mode). Refer to your TVs user
manual
@ Turn on this unit and press DISC on the
remote control.
@ Press SETUP on the remote control
@ Press l_ repeatedly to select { Video
Setup Page }.
@ Read the notification message on the TV
and confirm your action by selecting the
I_ in the menu and press OK.
There will be no picture on your TV
at this state until you have turned
on the progressive scan mode on
your TV.
@ Turn on your TV progressive scan mode,
refer to your TVs user manual
.... _ A message appears on the TV.
@
Confirm your action by selecting the
[_ in the menu and press OK.
.... ÷ The setup is now completed and you
can start to enjoy the high quality picture.
If no picture is displayed
@ Press OPEN/CLOSE A
@ Press • on the remote control.
@ Press AUDIO on the remote control.
Helpful Hints:
- Ifa blank/distorted screen appears, wait
for 15 seconds for the auto recovery.
- There are some progressive scan TVs that
are not fully compatible with this unit,
resulting in an unnatural picture when
playing back a DVD VIDEO disc in the
progressive scan mode. In such a case, turn
o_ the progressive scan feature on this unit
and your TV
@ Move to { Progressive } > { On } in the
menu and press OK to confirm.
21