Mitsubishi CS-31505 Owner's Manual page 96

Problems Possible Solutions For More Information
On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the TV.
See "Understanding the On-
Screen Displays" in Chapter
4 for a thll explanation of
the on-screen displays.
There's no sound even when
tile volume is turned up.
Check that the MUTE
button isn't on.
The TV's "Listen to" setting
may be set to "separate
audio program" (S.A.P.).
See "Remote control buttons
and functions" in Chapter 1,
which explains the location
and thnction of the MUTE
button.
See "Adjusting the sound" in
Chapter 3, which explains
how to adjust the "Listen to"
setting.
• You forget the code you used • Use the alternate procedure
to set the parental lock. that doesn't require the use
of the code.
• See the Appendix,
"Procedure for Bypassing
the Parental Lock."
You can't program the TV to
turn on automatically.
• The TV may be locked. See "Using the parental
lock" under "Using the
Advanced Features" in
Chapter 3.
• The sound doesn't match the
image on screen.
• The TY's "Listen to" setting
may be set to "separate
audio program" (S.A.P.).
See "Adjusting the sound" in
Chapter 3, which explains
how to adjust the "Listen to"
setting.
There is a large black
rectangle on the screen.
The TV has been set to
"text" mode, but there is no
text information being
broadcast.
See "Using the closed
caption decoder" uader
"Getting started" in
Chapter 3.
Troubleshooting
99