Mitsubishi Mr.Slim MSZ-GE06NA Operating Instructions Manual page 8

® OPERATING INSTRUCTIONS ®
I
ECONO
COOL
Press _ during COOL mode _ to start
ECONO COOL operation.
The unit performs swing operation vertically invarious c ycles according to the
temperature of airflow. Set temperature is set 4°F (2°C) higher automatically.
ECONO C OOL
Press C_Z} again to cancel ECONO COOL operation.
• ECONO COOL operationis also cancelledwhen the VANE buttonis
pressed i
What is =EECONO COOL"?
Swing airflow (change of airflow) makes you feel cooler than stationary airflow.
So, even though the set temperature is automatically set at 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
QSTART QSTOP
® Press _ or _ during operation to set the timer.
®START
r_,_,_ (ON timer) " The unit turns ON at the set time.
QSTOP
r=_=_ (OFF timer) " The unit turns OFF at the set time.
* ®÷1 or ®÷0 blinks.
* Make sure that the current time is set correctly.
_ Press _ (Increase) and _ (Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
- Set the timer while Q÷I or Q÷O is blinking.
QSTART QSTOP
Press _ or [_ again to cancel timer.
Note:
• ON and OFF timers can be set together. _t mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see _ "Auto restart
function".
En-7