Manual Operation (Cool, Dry, Heat) - Mitsubishi Electric Mr.Slim MSZ-A24NA Operating Instructions Manual

MANUAL OPERATION (COOL, DRY, HEAT)
[] Press the I_ button.
]Select the operation mode by pressing the _ button.
Each time this button is pressed, the operation mode is changed in sequence:
{3. (AUTO) _ _'_ (COOL) _ _ (DRY) _ _ (HEAT)
1
• Pressthe_button.
After the operation mode is set once, the operation starts in the same mode as
the one set previously from the next time by simply pressing the _ button.
Q OII Q O II Q O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O
• When the s_ temperature is to be changed:
• Pressthe_buttontalowerthetemperature, Onepresslowersthetamperaturebyaboutl°E
• Pressthe_ buttonta raisethefamperature, One press raises the tamperature by about I°E
• When the outside famperature is low, the fan of the outdoor unit turns on and oft frequently or decreases the rotation
speed to maintain sufficient cooling capacity.
• The famperature control (temperature setting) cannot be done.
• The room temperature is slightly lowered in this operation mode.
• The details of the display on the indoor unit are explained on page 6.
If the air conditioner does not cool or heat effectively,..
If the fan speed is set to Low or AUTO, some'dmes the air conditioner may not cool or heat the air effectively. In this case, change
the fan speed to Med. or upper.
Fan speed:Low orAUTO
Change_e fan speed.
Fanspeed: Ned. or upper