Maytag MHW7000AG0 Use & Care Manual page 18

Front-loading automatic washer
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
f"-
First try the solutions
suggested
here or visit our website
at www.maytag.com/product_help
-
"_
in Canada
www.maytag.ca
for assistance
and to possibly
avoid a service call.
if you experience
Possible Causes
Solution
Washer
won't
run or fill,
washer
stops working
Check for proper water supply.
Check proper
electrical
supply.
Normal
washer
operation.
The washer
door is not firmly shut.
Washer
not loaded as recommended.
Both hoses must be attached
and have water flowing
to
inlet valve.
Both hot and cold water faucets
must be turned on.
Check that inlet valve screens
have not become
clogged.
Check for any kinks in inlet hoses, which can restrict
water flow.
Plug power
cord into a grounded
3 prong outlet.
Do not use an extension
cord.
Ensure there is power to outlet.
Check electrical
source or call an electrician
to check if voltage
is low.
Reset a tripped
circuit
breaker. Replace any blown fuses.
NOTE: If problems
continue,
contact
an electrician.
Door must be completely
closed
and latched
for washer to run.
Washer
will pause during
certain phases
of cycle. Do not interrupt
cycle.
The washer
pauses
for about 2 minutes
during
certain cycles.
Allow the cycle to continue.
Some cycles feature
periods
of
tumbling
and soak.
Washer
may be stopped
to reduce
suds.
Cold Wash uses less water in the beginning
of the cycle to
provide a high concentration
of detergent
for optimal
cleaning
action.
Following
this concentrated
tumbling,
more water is used
to complete
the wash.
The door must be closed
during
operation.
Remove several
items, rearrange
load evenly in washer
drum.
Close door and touch and hold START.
Do not add more than 1 or 2 additional
items after cycle has started
to avoid tightly packing or unbalancing.
Do not add more water to the washer.
.J
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhw7000aw0Mhw6000aw0Mhw6000ag0Mhw7000aMhw6000a

Table of Contents