Maytag BRAVOS XL MVWB750YW0 Use And Care Manual page 12

Top-loading high efficiency low-water
Hide thumbs Also See for BRAVOS XL MVWB750YW0:
Table of Contents

Advertisement

Available languages

Available languages

r
TRANSPORTING
YOUR WASHER
1. Shut off both water faucets. Disconnect
and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect
drain from drain system.
4. Unplug power cord.
5. Place inlet hoses inside washer basket.
6. Drape power cord and drain hose over the console
and secure with masking tape.
7. Place foam packing ring from original shipping materials
back inside washer. If you do not have packing ring,
place heavy blankets or towels into basket opening.
Close lid and place tape over lid and down front of
washer. Keep lid taped until washer is placed in
new location.
Electrical
Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
De net use an extension cord.
Failure to follow these instructions
can result in death,
fire, or electrical
shock.
f
REINSTALLING/USING
WASHER
AGAIN
To reinstall washer after non-use, vacation, winter storage
or moving:
1. Refer to "Installation
Instructions" to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended
procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through BULKY cycle to dean washer and
remove antifreeze, if used. Use only HE High Efficiency
detergent. Use half the manufacturer's
recommended
amount for a medium-size
load.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents