Installation; Television Location; Optional Cable Connections; Ac Powersupply Cord - Panasonic SuperFlat CT-F2993X Operating Instructions Manual

INSTALLA TION
Installation
Television Location
This unit is intendedto be used with an optionalstand or entertainmentcenter. Consulty.0_u_
dealerfor availableoptions.
O Avoidexcessivesunlightor brightlights,including reflections.
O Keep away from excessive heat or moisture. Inadequateventilationmay cause internal
component f ailure.
[3 Fluorescent lightingmay reduceRemote Controltransmitting range. ,
[3 Keep away from magneticequipment,including motors, f ans, or externalspeakers.
Optional Cable
Connections
Shielded audio and video cables should be used between components, For best results:
17 Use 75-ohm coaxial shielded cables. "
[3 Check type of output and input connectors on your components.
0 Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLE-F AND FULLY INSERT, DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE, FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Polarized plug
Cable I Antenna 1 and 2
For proper reception, e ither a cable or antenna connection is required.
Cable Connection
Connectthe cable suppliedby your localcable company.
Note: A cable converter box may be required for proper reception.
Check with your local Cable company for compatibility
requirements.
Antenna I and 2 Connections
Incoming Cable from
Cable Company
21,
75 Ohm VHFAJHF
on back of TV
best reception an outdoor antenna is recommended.
Antenna 1 and Antenna 2 must be set to TV in the SET UP
menu.
For proper reception of VHF/UHF channels, an external antenna is required. For
Incoming Cable from
Home Antenna
Cable Mode is preset at the factory. Antenna
users must change to Antenna 1 and
Antenna 2 in the Set Up Menu.
El