Picture In Picture (Pip) Operation; With / Without A Vcr And Cable Box - Panasonic SuperFlat CT-F2993X Operating Instructions Manual

Picture In Picture (PIP) Operation
PICTURE IN PICTURE (PIP) OPERA TION
With / Without a VCR and Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching-two
(2) live broadcasts at the same time without or with an external video source (VCR).
Without a VCR (External Video Source)
Procedure
• Connect incoming cable to antenna (ANT) input on back of TV.
• Press the PIP button on the Remote Control to display the PIP frame,
Note: The audio is for the Main Picture, only.
• Choose channels for the PIP frame by pressing the Remote Control PIP
CHANNEL up/down buttons.
• Choose channels for the Main Picture by pressing the Remote Control CH
up/down buttons or by using the numeric keypad,
With A VCR (External Video Source) And Cable Box
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV
VCR CABLE BOX
I
I
Incoming
Cable
(Not Supplied)
CABLES NOTSUPPLIED
Note: The Remote Control must be programmed with supplied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Note:
Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is from the Main Picture only.
I
To view scrambled channels through your Cable Box in the PIP frame:
• Press the W/VIDEO button on the Remote Control to select the same video
input which your cable box is connected to.
• Verify the CABLE' BOX and VCR are ON and the VCR tuned to channel 3.
• Choose channels for the PIP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TM button on the Remote
Control and using the numeric keypad or OH up/down buttons.
The SWAP button switches the PIP and Main Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
im