Picture In Picture (Pip) Operation; Pip Operation With A Vcr And Cable Box; Ssseeseeeens - Panasonic CT-27G24 Operating Instructions Manual

Picture In PictuRE (PIP) OPERATION
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input.)
TERMINALS ON BACK OF TV VCR CABLE BOX
(may vary) cH
io" tenet oa
A—i—1
ANT INPUT | i
©@e 1
"sr © ©
AMP
: © © © : ANT INPUT
web L.O6
:
|
AUDIO = VIDEG
'2 OUT
Cable splitter mar
(Not supplied)
CABLES NOT SUPPLIED
Incoming cable
Note: The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See Programming the Remote
Control in the Remote Contro! Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
° Press the TV/VIDEO button on the Remote Control to select
the video PIP source.
° Verify the CABLE BOX and VCR are ON and the VCR is
tuned to channel 3.
e Choose channels for the P/P frame by pressing the CBL
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
° Choose channels for the Main Picture by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
SWAP Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.