Picture In Picture (Pip) Operation; With / Without A Vcr And Cable Box - Panasonic CT32G32 Operating Instructions Manual

Picture In Picture (PIP) Operation
PICTURE IN PICTURE (PIP) OPERATION
With I Without A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching'_o-
(2) live broadcasts at the same time without or with an external video source (VCR).
Without A VCR (External Video Source)
Procedure
• Connect incoming cable to antenna (ANT) input on back of TV.
• Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is for the Main Picture, only.
• - Choose. channels for the PiP frame by pressing the Remote Control PIP
CHANNEL up/down buttons.
• Choose channels for the Main Picture by pressing the Remote Control CH
up/down buttons or by using the numedc keypad.
With A VCR (External Video Source) And Cable Box
Connectyourtelevision to a VCR and CableBox,as shown.
TERMINALS ON BACK OF TV
VCR CABLEBOX
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with supp/ied codes to operate the VCR
and Cab/e Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Note:
Press the PIP button on the Remote Control to display the PIP frame.
Note: Theaudiois fromthe Main Picture only.
i
To view scrambled channels through your Cable Box in the PIP frame:
• Press the W/VIDEO button on the Remote Control to select the same video
input which your cable box is connected to.
• Verify the CABLE'BOX and VCR are ON and the VCR tuned to channel 3.
• Choose channels for the PiP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down buttons.
TheSWAP button switchesthe PIP and MainPicturesource. Press the RECALL button forPiP
andMain Picture sourcestatus, on screen.
El