Selecting The Input Mode - Panasonic Omnivision PV-HD1000 Operating Instructions Manual

VCR/TV
CHANNEL Multi Function Display
Up/Down
Selecting the Input Mode
Press INPUT.
The display will change in the order below.
C,,---_ Channel -_p D'rv_._
Number )
LINE
or
Press CH AIJV.
The display will change in the order below.
L_I NEI<_"-D_-'- _JIABL Eo) r (6TV9)3
VcR/rv --
OQQQ
QQ®
®®®
©®®
-- INPUT
--CHANNEL
Up/Down
• D3"V:For rear audio/videoconnectionof NTSC signal or
digital interfacejack with IEEE1394 connection.
• When DTV is selected, =d" is displayed in the Multi
FunctionDisplay.
• LINE: For front audio/video connection.
• When LINE is selected, =L"is displayed in the Multi
FunctionDisplay.
Record One Program While Watching Another
1 Press VCR/['V while recording is in progress to turn off
the VCR indicatorin the Multi Function Display.
2 Use the TV channel controlsto select a program. The
VCR will continue to record your program while you
watch any channel you choose.
• To switch backandforth between therecording andviewing
channel, p ressVCR/'rv.
Selecting Channels at the D-VHS VCR
"
1
Turn yourTV and D-VHSVCR on,
• VCR Indicatorlightson the Multi FunctionDisplay,
If indicatordoesn't light, pressVCR/TV to turn it on,
2 UseCH _ on the remote control o r D-VHSVCR
to
select channels.
• To switch backto TV channelselection, press VCR/TV to
turnVCR indicatoroff, or simplyturn the D-VHS VCR power
17