Vcr And Cable Box Connection; Amplifier Connection (To Audio Amp) - Panasonic CT-27SX10 Operating Instructions Manual

VCR and Cable Box Connection
OP_ONAL EQUIPMENT CONNEC_ONS
Follow this diagram when connecting your television to both a VCR and a cable box.
VCR
CABLE sex
TERMINALS ON BACK OF TV
U)l _(_ either throe _
S-Vtdeo or Video
nection
vl_-o
AMP
Incoming Cable
CABLES NOT INCLUOEO
Note: The remotecontrolmust be programmedwithsuppliedcodes to operatethe VCR andcablebox.
See Programmingthe Remote Controlin the Remote Control Quick Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Tune the television to CH 3 or 4 depending on the Cable box RF out.
2. Using the cable box, tune to the premium cable channel you want to view.
Viewing a premium (scrambled) cable channel using the AN input jacks
1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
2. Turn the VCR ON.
3. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
4. Using your cable box, tune to the premium cable channel you want to view.
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening through a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust "IV volume to desired level.
4. Adjust amplifier volume to match the "IV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier.
im