Panasonic Digital Palmcorder PalmSight PV-DV910 Operating Instructions Manual page 58

J
If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom
No picture in the EVF or LCD Monitor ...
Video cassette can't be inserted ...
Video cassette can't be removed ...
No operation starts when operation buttons
are pressed ._
Recording cannot be done ...
AutoFocus does not operate ...
Sound from microphone can't be monitored
Sound can't be heard ...
Correction
• Make sure the Power Source is connected.
(pp. 11, 12)
• Make sure the POWER switchis set to ON.
(pp. 27, 32)
• Check the Dew Indicator.(p. 23)
• Make sure the battery is fully charged.(p. 10)
• Make sure all necessarycables are connected
correctlyand firmly. (p. 12)
• Make sure the Lens Cap is removed.(p. 27)
• Make sure the Power Source is connected.
(pp. 11, 12)
• Insert the cassette with the window side facing up.
(p. 13)
• Make sure the Power Source is connected.
(pp. 11, 12)
, Check the Dew Indicator. (p. 23)
• Make sure the recordtab is closed. (p. 14)
• Check the BatteryIndicator.(p. 20)
• Check the Dew Indicator.(p. 23)
• Make sure the FOCUS is set to AUTO. (p. 44)
• Make sure the unitis ON with CAMERA mode.
(p. 27)
• Make sure the unit is set to REC or Record/Pause
mode.
• Make sure the Audio on the VCR MENU is set to
ST1. (pp. 19, 48)
58 For assistance, call 1-800-211-PANA(7262)