Panasonic Digital Palmcorder PalmSight PV-DV910 Operating Instructions Manual page 46

To record high speed motion (e.g.a.tennis stroke) for improved STILL or SLOW MOTION
playback, when watching the tape on this Camcorder.
Before you begin...
• Connect the Camcorder to a power source.
• Set the POWER Switch to CAMERA.
• Insert a cassette with record tab (see page 14).
In the AUTO mode (no indication in the EVF), the Camcorder will automatically adjust the
shutter speed (1/100).
• AUTO mode is automatically selected whenever the POWER Switch is set to CAMERA.
The high Speed Shutter indicator flashes when the light level is inadequate.
More light should be provided to achieve better picture quality and color.
MENU Button SELECT SET WHEEL
Note:
• For proper color reproduction, it is
recommended that you use this feature
outdoors. For indoor High Speed Shutter
recording, additional halogen or tungsten
light should be provided. Fluorescent light
will degrade the picture quality.
• This feature requires ample light. More
light is required for the fastest shutter
speeds.
• The Auto Focus system may not operate
properly in insufficient light when using
the High Speed Shutter.
Press MENU to display the camera
mode menu in the EVF or the LCD
monitor.
Rotate the SELECT SET WHEEL to
select SHUTrER, and then press
down on the SELECT SET WHEEL to
Rotate the SELECT SET WHEEL to
obtain one of the following shutter
speeds.
1/60 118000
1/100 1/4000
f
1/120 1/3000
f
1/180 1/2000
11250 1/1500
f
1/350 1/1000
1/500 _ 11750
46
For assistance, call 1-800-211-PANA(7262)