Panasonic TC-L32C12 Operating Instructions Manual page 29

(Continued)
Adj ustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
÷ Favorite: Only channels registered as FAVORITE (p. 18)
Selects the screen menu language (p. 15) [Language
Adjusts the clock (p. 15) [Clock
Sets channels (p. 39) [ANT/Cable setup
Selects the terminal and label of the external equipment (p. 41) [Input labels
Controls equipment connected to HDMI terminals (p. 32) (On/Off)
÷ "Power off link", "Power on link", "Stand-by power save", "Auto power stand-by" and "Default speakers" [VlERA Link _i
cannot be selected if "Off" is set.
Sets "Power on link" of HDMI connection equipment (p. 32) (Yes/No)
Sets "Power off link" of HDMI connection equipment (p. 32) (Yes/No)
Set "Stand-by power save" of HDMI connection equipment. (p. 32) (No/Yes)
Set "Auto power stand-by" of HDMI connection equipment. (p. 32)
(NoNes (with reminder}/Yes (no reminder}
Selects the default speakers (p. 32) (TV/Theater)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room. [Power save _]
(Standard/Saving)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed
for more than 10 minutes. (Enable/Disable)
Note
÷ Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel.
÷ "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned
on for the first time after turning the power off by "No signal for 10 minutes".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or side panel key
continues for more than 3 hours. (Enable/Disable)
Note b activi,: f.or03 hours ] ÷ Not in use when setting "Auto power on", "On/Off Timer or PC input display.
÷ "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on _
for the first time after turning the power off by "No activity for 3 hours".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes)
TV power cord must be plugged into this device. TV comes on every time the power is restored. [Auto poweron_]
÷ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 42)
Set "Thumbnail" or "Slideshow" to play back SD cards automatically. (SlideshowfrhumbnaillSet laterlOff) pay SDcard alomatically I
L
Displays TV version and software license. About
Performing Reset will clear all items set with Setup, such as channel settings. (p. 38)
Reset to defaults ]
@
.._ "-F
•-_ ©
E'_
-Cr-
ag
Adj ustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only)
Sets favorite channels. (p. 18)
Changes the station identifier. (p. 39)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 39)
29