Panasonic TC-L32C12 Operating Instructions Manual page 16

First Time Setup
(Continued)
Auto channel setup
_) Select "ANT/Cable setup"
_)next
(2_Select "ANT in"
d)select
16
• Press to exit from
a menu screen
EXIT
÷ To change setting
(Language/Clock/
ANT/Cable setup/
Input labels) later, go
to Menu screen
(p.28)
÷ About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
_ ¢_set
- Cable: Cable TV
Antenna: Antenna
Llpselect Not used: Skip TV tuning o_,,go to O
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
÷ Typical when Cable/Satellite box is connected to a TV input.
÷ Prevents accidental tuning to an unavailable signal.
Select "Auto ram"
(2)next
(_ Select
L0select
mode (ALL channels/Analog only/Digital only)
_2_ok
(0select
Start scanning the channels
÷ Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
Confirm registered
channels
@ (l_select
"""Apply"
(2_ok
÷ If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and the "Manual
program" menu will also exit automatically.
÷ If you perform scanning more than twice, previously saved channels are erased.
Set the Input labels
Label: [BLANK] SKIP/VCR/DVD/
(2_next CABLE/SAT E LLITE/DVR/GAM E/
AUX/REC EIVE R/COMPUTER/
Blu-ray/CAME RA/DVD REC/
(l_select HOME THTR/MONITOR/MEDIA
CTR/MEDIA EXT/OTHER
or
DF.mm
Dmm
uDm
m
PC
Switches Input mode alphabet to
numeric