Panasonic TC-L32C12 Operating Instructions Manual page 25

• PC menu setting (change as desired)
¢ Makingsettings_ "Howto UseMenu Functions"@ to 0 (P.26)
Menu Item : Adjustments/Configurations (options)
Reset to
defaults Resets PC adjust
@ H & V: The H and V sync signals are input from the HD/VD connector. (p. 48)
Sync @ On green: Uses a synchronized signal on the Video G signal, which is input from the G
connector. (p. 48)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
Dot clock blurred.
H-position
V-position
Clock phase
Adjusts the horizontal position. _-_/_j
oi1°"_ i
Adjusts the vertical position.
PC
adjustments
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
Input @ Input signal switched from 640x480 to 800x480
resolution
@ Input signal switched from 1024x768 to 1280x768 or 1366x768
H-frequency
V-frequency
Displays the H (Horizontal)IV (Vertical) frequencies.
@ Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
@ Audio menu (p. 26)
@
co
_q.
©
Ch
d3
('D
'm
0
<
25