LG MFL39817402 Owner's Manual page 11

iii
Operating Instructions
f
DuringHealthy DehumidificationOperation
u If you select the dehumidificationmode on the OPERATION MODE
SELECTIONBUTTON, the product starts to run the dehumidification
function. It automaticallysets the room temperature and airflow volumeto
the best conditionfor dehumidification, based on the sensedcurrent room
temperature.
In this case, however,the setting temperature is not displayed on the remote
controller and you are not able to control the room temperatureeither.
u During the healthy dehumidification function, the airflow volume is
automaticallyset according to the optimization algorithm respondingto the
current room temperature status, so that the room condition is kept healthy
and comfortableeven in the very humid season.
_ To run the healthy dehumidification mode follow steps 1, and 2 and 4 I
(See operation mode)
f
In this operation mode the actual setting temperature and the fan speed
are automatically set by the electronic control logic based on the current
room temperature. If you feel hot or cold press the temperature setting
buttons respectively for more cooling or heating effect.
NOTE : You cannot set the actual setting temperature and the indoor fan
speed in this operation mode. But you can use the Chaos swing
in this operation.
If the system is not operating as desired, switch manually to
another mode.
ulllllll
Auto operation basically is heating or cooling function of the air
conditioner.
But during this operation the controller changes the operation mode
automatically to keep the temperature within +2°C with respect to the
Owner's Manual 11