Mounting On A Table - LG 50PM9700 Owner's Manual

20 ASSEMBLNGANDPREPARNG
Mounting on a table
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inch) (minimum) space from
the wall for proper ventilation.
2
Connect the power cord to a wall outlet.
_]\ CAUTION
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
\
Swivel 20_+2 degrees to the left or right and adjust
the angle of the TV to suit your view.
200+2° 20o+2o
..........
_ CAUTION
• When adjusting t heangle ofthe TV,watch
outforyour fingers.
- Personal injury m ay occurif hands or
fingers arepinched.If the productistilted
too much, it may fall, causingdamage or
injury.
Front Rear
(Depending on model)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
1
• Make sure that children do not climb on or /
J
hang on the TV.
_ NOTE
• Use a platform or cabinet that isstrong and
large enough to support the TV securely.
• Brackets, bolts and ropes are optional. You
can obtain additionalaccessories from your
local dealer.