LG 50PM9700 Owner's Manual page 11

ASSEMBL NG AND PREPAR NG 11
..... NOTE .............................................................................................
• How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device] [to the TV] .................................................................................................
[Figure 1]
[Cross Section of Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and wall plug.
[to a wall plug] [to the TV] ......
[Cross Section of Ferrite Core]
[Figure 2]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the
LAN cable once on the ferrite core. Place the ferrite core close to the TV.
[to an External device] [to the TV]
rnm)
[Figure 3]
[Cross Section of Ferrite Core]
4 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L, R
cable. Place the ferrite core close to the TV.
[to an External device] [to the TV] ..............................................................................................................
10 mm (+/-5 mm)
[Figure 4]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.
- If there are five ferrite cores, follow as shown in Figures t, 2, 3 and 4.
/