Attaching The Protection Cover; Tidying Cables - LG 50PM9700 Owner's Manual

ASSEMBLNGANDPREPARNG
]9
Attaching the protection cover
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
After removing the stand, push the supplied
protection cover into the opening at the bottom
of the TV until it locks in place.
This will protect the opening from accumulating
dust and dirt.
Protection cover
Secure the TV and the protection cover with
the 2 screws.
2 EA
M4 x 30
Tidying cables
2
Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
Power cord holder
Gather and bind the cables with the cable
holder.
/
i,, Cable holder
CAUTION
Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
-| CAUTION
• Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.