34
REMOTE
CONTROL
Registering
Magic
Remote
Control
The Magic remote Control operates by pairing with
your TV. Once you purchased the TV, please
register the Magic remote control as follows;
How to register the Magic Remote Control
control
How to Re-register
the Magic Remote Control
after Registration Failure
i PreSsand h01dthe BACK_ and
BACK
HOMEt_ buttons together for 5
Seconds
to reset,
then
register
it
by fol!owing !!How to register the
HOME
Magic remote Control'! above. (Once
the reset is €omptetel the light On
the Pointer blinks.)
2 To re:register the Magic remote
control, pieSs and h01dthe BACK_J
button for 5 seconds toward the TV.
(once the reset is Complete; the
light on the Pointer blinks.)
How
to use
Magic
Remote
Control
1 If the pointer disappears, move
tne remote control
slightly
to teft
or right Then. it will automaticatlv
appear on the screen.
> If the pointer has not been usea
for a certain period of time _t
wdl @sappear
2 You can move the
pointer
uy
aimmc the Pointer Receiver of
the remo:e contro_a_your TV
then move it left.
right,
up or
aown.
, ,f the pointer does not WOrK
properly after clicking the
Wheel (OK) button, teave
the remote control for 10
seconds then use _tagain.
Precautions
to Take
when
Using
the
Magic
Remote
Control
• Use the remote control within the maximum
communication
distance (10 m, 32.8ft).
Using the remote control beyond this
distance, or with an object obstructing
it,
may cause a communication
failure.
• A communication
failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference,
as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
• The Magic Remote Control may be damaged
or may malfunction
if it is dropped or
receives a heavy impact.
• Take care not to bump into nearby furniture
or other people when using the Magic
Remote Control.
• Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
° It is recommended
that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the magic remote control may
not perform as expected due to frequency
interference.