Table of Contents
Advertisement
Available languages
Available languages
OW TO USE
24
SPECIAL FUNCTION
BUTTONS
Your Steam Washer
TM
features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
TOAdd Cycle Options
to a Cycle:
_IP Turn on the washer and turn the cycle
selector knob to select the desired cycle.
O
Use the
buttons to
the
cycle setting
adjust
settings for that cycle.
O
Press the cycle option button(s) for the
option you would like to add. The cycle
option buttons will light when selected.
O
Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option
is available with every cycle. See the Cycle Guide
for details.
STEAM
Use the STEAM button to add
steam to the cycle for extra
cleaning power and improved
efficiency. See Steam Cycles
section for additional details.
NOTE: The steam option cannot be used with all
cycles.
DELA Y WASH
Once you have selected the cycle and
other settings, press this button to
delay the start of the wash cycle. Each
press of the button increases the delay
time by one hour, up to 19 hours.
STAIN CARE
Use this option for heavily soiled
_
oads that need improved stain
treatment. When STAIN CARE is
selected, the water temperature for
the selected cycle will begin as warm water to help
prevent the setting of certain types of stains. Then
as the cycle progresses, the water will be heated to
higher temperatures to help remove stains that require
treatment at higher temperatures. This option is
designed for optimum stain removal.
NOTE: If STAIN CARE is selected with the SANITARY
cycle, the cycle will begin with very hot water since
that is default for that cycle and cannot be changed.
CUSTOM PGM
Use the CUSTOM PGM button to
select the course that you saved
by using PGM SAVE.
COLDWASH
TM
Use this function to save energy
by using cold water while ensuring
proper washing. For high wash
efficiency, it is recommended
to
use less than 8 pounds.
FRESH CARE
Use this function when you are
not able to unload your clothes,
soon after the wash cycle ends.
This function provides periodic
tumbling for up to about 8 hours to prevent
wrinkle. If you press the START/PAUSE or ON/
OFF button, you can unload your laundry at
anytime.
EXTRA RINSE
This option will add an extra rinse
cycle to the selected cycle. Use
this option to help ensure the
removal of detergent or bleach
residue from fabrics.
ADD GARMENTS
The add garments function will be able to add
garments during the cycle.
When the display show Add Garments, press
START/PAUSE button and add the garments.
NOTE: This function CANNOT be used when tub
temperature
or water level is high and during the
spin.
Advertisement
Table of Contents
