Panasonic OmniVision PV-C2060 Operating Instructions Manual page 8

When the unit is turned on the first time, setup
mode is entered automatically.
_ Press POWER* on
O the remote or unit.
2
SELECT LANGUAGE
PUSH CH • :English
OPRIMIR OH • :Espa_o[
APe VOL ÷ :Fran_ais
Select the language.
_-- - for English
_- L for Spanish
(Espafiol)
(_ - -for French
(Frangais)
• If wrong language is set, complete "Reset all unit Memory
Functions" steps page 48.
• If you use a cable box, it must be tefl on.
3
CHANNEL/CLOCK AUTO S ET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX. TUNE IT TO YOUR
LOCAL PBS Ca THEN,,,
PLEASE PUSH CH UP KEY
Start ChannelAuto Set
and Clock Auto Set.
Press CH •.
Process of Setup
CHANNEL_
DOWN
+!
VOLUME
UP
I
i
c. _UTO S ET P.OCEED,NG____
AUTO CLOCK SET
PROCEEDING
Case 1 (Setup completed)
6/7/2000WED 1 2:00PM
OST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
Press CH • to exit.
• If your area observes
daylight saving time,
but you would like to
turn the DST feature
off, complete the
'q'o Set or Reset the
Clock" step on page
46 and set DST : OFF,
• If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; complete the Time
Zone Adjust steps on the next page.
(Setup incomplete)
AUTO CLOCK SET [
i s INCOMPLETE
t
See Case 2
PUSH ACTION TO S_T CLOCK
next page.
[ IMPORTANT NOTE FOR AUTO CLOCK SET !
• Auto clock set is performed the first time when the unit is turned off each day. If used, a cable box must be left on and /
• tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via AudioNideo Jacks, an RF coaxial cable must also be
connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.