Panasonic OmniVision PV-C2060 Operating Instructions Manual page 10

1]
0
Press POWER* on
the remote or unit.
[_Check list before you begin.
E] Allconnectionsare made. (See page 7.)
[] Your unit is plugged in.
2
3
08
ASC
Select a channel.
or
(Z_ (!3 (!)
C_
Using CH &V or
NUMBERED
keys.
24 Iltlfllllll ......................
Model PV-C206O unit is shown here.
PLAY/
3 REPEAT
1 2 PHONES
Jack
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
NIGHT
Set NIGHT mode.
E
I Press NITE.
NITE • NIGHT mode may be
Q selected when watching
TV, playing a tape, or
while in FM mode.
To Cancel, press NITE.
• Previous settings are restored.
• NIGHT mode is canceled when
power is turned off or power
failure occurs.
• Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
• Rapid Tune
Press R-TUNE to display the last channel you were watching.
• Audio Mute
Press MUTE to instantly mute the sound,
Press again, to restore the previous sound level.
• Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack,
• SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the unit for 5
seconds to display demo screen.
Repeat this to exit.
ICH
IP/DOWN
VOL
P/DOWN
!!
"2NUMBERED
KEYS
I" NITE
I i!