LG 47LB1DA Owner's Manual page 35

522J_147LB1DA_,_UB 06/7/21 2:02 PH Page 34
CONNECTIONS & SETUP
Screen Setup for PC mode
When RGB connect to PC output and select the RGB-PC in Main
Input, this function is used.
When HDMI IN 1 (DVl) connect to PC output and select HDMI 1/DVI
input, this function is used.
Adjustment for screen Position, Size, Phase, Reset
e ® ®
N
O
Z
Z
m
Z
m
C
O Press the ADJUST button and then use A or Y button to
select Position, Size, or Phase.
0
0
Press the ENTER button and then use A Y 4 i_ button to
make appropriate adjustments.
wThe Phase adiustment range is -16 _ +116.
In HDMIoPC/RGBoDTV mode, Phase is not available.
wThe Size adjustment range is -30 ~ +30.
In HDMI-PC/RGB-DTV mode, Size is not available.
Press the ENTER button.
Initializing (Reset to original factory values)
To initialize the adjusted values
Posffdon
Size
Phase
@@@
This furtction is to adjust picture
to left/right and up!down as you
prefer:
This function is to minimize any
ve_tkaJ ba_ or stripes visible on
the screen background. And the
horizontal sc[een size will also
change,
This function a_[ows you to
remove any horizontal nolse and
dear or sharpen the image of char-
acters,
Press the ADJUST button and then use A or T button to
select Reset
Press the ENTER button and then use @ or I_ button to
select Yes.
Press the ENTER button.
34
@ @ @