LAZBOY D71 M80033 Owner's Manual
LAZBOY D71 M80033 Owner's Manual

LAZBOY D71 M80033 Owner's Manual

Sears peyton 3pc bar set balcony chair

Advertisement

OWNER'S MANUAL
Sears Peyton 3PC Bar Set
* Balcony Chair
Product Code: D71 M80033
UPC Code: 7-22938-07961-2
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
866-391-4868
8am-5pm (EST), Monday-Friday.
View the expanded assortment of outdoor living product on-line at
WWW.lazboyoutdoor.com
and
WWW.sears.com
Page 1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D71 M80033 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LAZBOY D71 M80033

  • Page 1 OWNER’S MANUAL Sears Peyton 3PC Bar Set * Balcony Chair Product Code: D71 M80033 UPC Code: 7-22938-07961-2 Date of Purchase: __ / __ / __ If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 866-391-4868 8am-5pm (EST), Monday-Friday.
  • Page 2 W A R R A N T Y This warranty is a limited warranty, and applies to the original purchase only. Proof of purchase is required. This is a residential warranty and does not apply to commercial use. This collection carries a 5 year limited warranty and is valid from original date of purchase to the original owner (proof of purchase required): NOTE: Glass breakage is not a warranted item.
  • Page 3: Parts List

    CAUTION: Read all the instruction before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts, nuts and nut covers are securely tightened.
  • Page 4 M6 Washer M8 Spring Washer M6 Bolt Cap M8 Bolt Cap M8 Nut Steel Plate Hex Wrench Seat Cushion Back Cushion Assembly Steps: Step1: Attach right arm (B1) to seat frame and back (A) with M6x45mm hex head bolt (E1), M6x20mm hex head bolt (E2), M6 washer (F1) using hex wrench (J).
  • Page 5 Step2: Attach the T-shape connector (D) to seat frame and back (A), make sure the holes in the T-shape connector (D) are completely aligned with the holes in “U” bar of the seat frame (A) as shown in figure 2 expanded view. Fix with M8x40mm hex head bolt (E3), steel plate (I), M8 spring washer (F2), and M8 nut (H) using hex wrench (J).
  • Page 6 Step5: Place seat cushion (K) and back cushion (L) in balcony chair as show figure 4. Check and be sure the chair is assembled tightly and stable before you use. Figure 4 Now the balcony chair is ready for your enjoyment. Page 6 of 6...

Table of Contents