Thank you for your purchase THANK YOU FOR YOUR PURCHASE! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled □ properly and fully tightened as per the instructions. When placing in the desired location, □ ensure that all legs are resting on the same surface. You may adjust the legs levelers as required to ensure that the item stands in a rigid position.
Warranty (continued) We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production. For a copy of our full limited warranty, please contact our customer service team below. Contact the Customer Service Team at 1-866-391-4868 or visit www.Bjifurniture.com. Care and Maintenance Do not allow water to build up in frames.
Pre-Assembly PLANNING ASSEMBLY PLEASE READ COMPLETE USE AND CARE GUIDE PRIOR TO ASSEMBLY! Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a nonabrasive surface to avoid scratching. It takes about 25 minutes for three persons to complete all the assembly.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Left Arm Right Arm Chair Seat Chair Back Chair Swivel Base Stem Bracket Seat Cushion Back Cushion Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER. □ DO NOT FULLY TIGHTEN BOLT UNTIL INDICATED IN STEP 3. □...
Assembly Instruction Attaching the stem bracket NOTE: Do not fully tighten the bolts. □ Attach the stem bracket (I) to the chair seat (F) using washers (EE) & (E1E1) and hex bolts (CC) & (C1C1).
Page 8
Assembly Instruction (continued) Attaching the chair back NOTE: Do not fully tighten the bolts. □ Attach the chair back (G) to the chair seat (F) using washers (EE) and hex bolts (AA).
Page 9
Assembly Instruction (continued) Attaching the chair arms □ Attach the arms (D) & (E) to the chair seat (F) using washers (EE) and hex bolts (BB). □ Attach the arms (D) & (E) to the chair back (G) using washer (EE) and hex bolts (AA). □...
Page 10
ssemb bly Ins structi ontinu ued) Inser rting the e chair bucket □ Place t the chair b ase (H) on n a flat surf face and a lign the ste em under t the seat fra a me with th he hole on the base.
Page 11
ssemb bly Ins structi ontinu ued) Addi ng the c cushion □ Place t the seat cu ushion (J) a and back c cushion (K ) onto the chair.
Please refer to part number when reordering Questions, problems, missing parts? Before returning to the store, call our Customer Service 8 a.m. - 5 p.m., EST, Monday-Thursday 8 a.m. – 4 p.m., EST, Friday 1-866-391-4868 Made in/ Hecho en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL60179 See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com...
Page 14
Thank you for your purchase THANK YOU FOR YOUR PURCHASE! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team, We know you have a choice when it comes to your patio furniture needs, so from our team to yours, thank you for letting us be a part of your outdoors.
Safety Information SET UP YOUR FURNITURE WARNING: Do not sit or stand on the table. PROPERLY Ensure that all parts are assembled □ properly and fully tightened as per the instructions. WARNING: Do not place heavy items on the table top. When placing in the desired location, □...
Warranty (continued) Glass table top breakage and corrosion or rusting of hardware are not covered. In addition, purchase parts are not covered under this warranty. Proof of purchase (dated register receipt) is required for warranty claims. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-Assembly PLANNING ASSEMBLY PLEASE READ COMPLETE USE AND CARE GUIDE PRIOR TO ASSEMBLY! Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a nonabrasive surface to avoid scratching. It takes about 25 minutes for three persons to complete all the assembly.
Pre-Assembly (continued) PACKAGE CONTENTS -------------------------------- -------------------------------- -------------------------------- Part Description Quantity Table Top Table Leg Fixed Connector Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER. □ DO NOT FULLY TIGHTEN BOLT UNTIL INDICATED IN STEP 2. □...
Assembly Instruction Attaching the fixed connector NOTE: Do not fully tighten the bolts. □ Place the fixed connector (C) on a soft, flat non-abrasive surface. □ Attach the table legs (B) to the fixed connector (C) using washers (EE) and hex bolts (DD).
Page 20
Assembly Instruction (continued) Attaching the table top □ Place the table top (A) on a soft, flat non-abrasive surface. □ Attach the table legs (B) to the table top (A) using washers (EE) and hex bolts (DD). □ Tighten all hex bolts (DD) with the socket wrench. □...
Page 21
Assembly Instruction (continued) Positioning the table □ Turn the table over and set it down on its legs. □ The table is now ready for use.
Please refer to part number when reordering Questions, problems, missing parts? Before returning to the store, call our Customer Service 8 a.m. - 5 p.m., EST, Monday-Thursday 8 a.m. – 4 p.m., EST, Friday 1-866-391-4868 Made in/ Hecho en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL60179 See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com...
Need help?
Do you have a question about the Sears Madeline D71 M20918 and is the answer not in the manual?
Questions and answers