Nikon COOLPIX P500 User Manual page 11

o_
o
o
o
w
Notes on Continuous
• Flash cannot be used during continuous shooting (except for interval timer shooting). The focus,
exposure, and white balance settings are fixed at the values for the first picture in each series.
• it may take some time to save the images after shooting. The amount of time it takes to finish
saving the ca ptu red images depends on the number ofimages, image quality, image size, the write
speed of the memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images,
• The speed of continuous shooting may decrease depending on the image quality, image size, type
of memory card used, and shooting conditions.
• When continuous is set to Pre-shooting cache, Continuous H: 120 fps, Continuous H: 60 fps
or Multi-shot 16, banding or variance in brightness or hue may occur in images that were
captu red under lig hting that flickers at high speeds, such as fluorescent, mercury vapor, or sodium
vapor lighting.
• When continuous is set to Pre-shooting cache, Continuous H: 120 fps or Continuous H: 60
fps, accurate exposure may not be achieved (images may be overexposed) in images captured on
bright sunny days.
• Thisfeature cannot be used simultaneously with certainfunctions,See "Functions that Cannot be
Applied Simultaneously" (_I04) for more information.
_1_ Note on Best Shot Selector
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
[] Images Captured in Continuous
Each time images are capturect using Continuous H, Continuous L, Pre-shooting cache,
Continuous H: 120 fps or Continuous H: 60 fps, the captured images are saved as a "sequence"
(_113),
78