Eye-Fi Upload; Firmware Version; Eye-Fi Cards; Supported Eye-Fi Cards - Nikon D3000 User Manual

This option isdisplayed onlywhen anEye-Fi memory c ard (available separately from
third-party s uppliers) isinserted i nthecamera. Choose E nable to upload
photographs toapreselected destination. Note thatpictures w illnotbeuploaded i f
signal strength isinsufficient.
Observe alllocal l aws concerning wireless devices a ndchoose D isable where
wireless devices areprohibited.
When anEye-Fi card isinserted, itsstatus i sindicated b yanicon
intheinformation display:
• _: Eye-Fi upload disabled.
• _: Eye-Fi upload enabled b utnopictures a vailable forupload.
• _ (static): Eye-Fi upload enabled; waiting to begin upload.
• _ (animated): Eye-Fi upload enabled; uploading d ata.
• _: Error.
[I_ Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected. Ifa warning is displayed in
the monitor (_ 183), turn the camera off and remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
[] Supported Eye-Fi Cards
As of April 2009, the following 2 GB Eye-Fi cards can be used: Eye-Fi Card, Eye-Fi Home, Eye-Fi
Share, and Eye-Fi Explore. Eye-Fi cards are for use only in the country of purchase. Be sure
the Eye-Fi card firmware has been updated to the latest version.
View the current camera firmware version.
139