Table of Contents
Advertisement
OPERATION
Choke Control (if so eOUlDDed) - Used to start cold engine.
0
All Svmma
Go Lloht (If so eouleoed_ - If this indicator is lit,
the engine will not start.
1.
Your clutch-brake pedal may not be fully depressed.
2.
The mower clutch lever may not be in the DISENGAGE
position.
Ammeter (If so soUlDDedl - Indicates whether bakery is be-
ing recharged when engine is running. If charge is not indi-
cated while engine is running at full throttle, have engine
charging system checked by an authorized engine service
dealer.
Transmission Coptrol Levtr - Used to select ground speed
ranges as well as direction of motion (forward-neutral-re-
verse). Forward speed ranges are labeled (1 -2-3-4-5) or (1-2-
3-d-S-S).
No. 1 range isslowest forward speed, used for traveling up
or down steep hills or for snow removal.
No. 2 range is used for cutting tail or heavy grass.
No. 3 range is used for average mowing conditions.
No. 4 range is used for light mowing.
\.
NO. 5 range is used for very light mowing on smooth flat
surfaces on a 6 speed. On a 5 speed it is used for
transporting the unit.
No. 6 range should be used for transporting unit only,
l
A
Come toe full stop before changing dlrection_
•
°fm°t=-
)
_-
Used to lockbrake-clutch pedal in brake
position. NOTE: Check gear shift position and know
o p • r-
ating intentions before releasing brake.
1.
Depress brake-clutch pedal fully, engaging brake.
2.
Push parking brake lever forward and engage notch in
parking brake lever against main frame.
3.
To release parking brake, apply pressure to pedal and
swing will release parking brake lever.
Brake-Clutch Pedal - This is a dual purpose control. Press
pedal halfway down to disengage clutch, it is used for changing
speed range or direction oftravel (forward or reverse). Release
pedalto engage clutch. With pedalcompletely depressed, brake
is applied.
16
Advertisement
Table of Contents
