Table of Contents
Advertisement
3_
The rope guide is attached
to the right side of the upper
handle. Loosen the wing nut which secures the rope guide.
See Fig. 3-3.
Figure
3-3
4_
a.
Hold blade control
against
upper handle.
b.
Pull starter rope out of the engine. Release blade
control
handle.
c.
Slip starter rope into rope guide.
d.
Tighten
wing nut.
Insert post on cable ties into holes provided
on the lower
handle. Pull cable tie tight and trim excess. See Fig. 3-4.
GrassCatcher
Follow steps below to assemble the grass catcher (if
needed).Make
certain bag is turned
right side out before
assembling
(warning
label will be on the outside).
a.
Place bag over fra me so that its black plastic side is
at the bottom.
b.
Slip plastic channel
of grass bag over hooks on the
frame. See Fig. 3-5. All the plastic channels except
center top of bag attach from outside
of bag.
f
Figure
3-5
c.
Attach center top of bag from inside of bag.
J
Figure 3=4
'°1
SECTION
3 -- ASSEMBLY &
SET-UP
Advertisement
Table of Contents
