Dell Alienware Aurora R3 Manual page 32

Advanced — Frequency/Voltage Control
Advance DRAM
Allows you to access the Advance DRAM
Configuration
Configuration submenu.
Overclock Configuration Allows you to access the Overclock
Configuration submenu.
Overvoltage
Allows you to access the Overvoltage
Configuration
Configuration submenu.
Load Level 1 Defaults
Allows you to load Level 1 default setting.
NOTE: This setting may not be available for
some processors.
Load Level 2 Defaults
Allows you to load Level 2 default setting.
NOTE: This setting may not be available for
some processors.
Advanced — ME Subsystem
ME Version
Displays the ME version number.
ME subsystem
Allows you to enable or disable the ME
subsystem.
End of Post Message
Allows you to enable or disable the End of Post
Message.
30 CHAPTER 3: USING YOUR DESKTOP
Advanced — ME Subsystem
Execute MEBx
Allows you to enable or disable the Execute
MEBx.
Integrated Clock Chip
Allows you to access the Integrated Clock Chip
Configuration
Configuration submenu.
Advanced — ME Subsystem — Integrated Clock Chip Configuration Submenu
ICC OverClocking Lib
Displays the ICC OverClocking Lib Version
Version
number.
Number of ICC Profiles: Displays the number of ICC Profiles supported
on your computer.
Current ICC Profile
Displays the current ICC Profile Index value.
Index:
ICC Enable
Allows you to enable or disable the Integrated
Clock Chip.
Advance DRAM Configuration Submenu
Memory-Z
Opens submenu to display the SPD
configuration for each memory module.
Command Rate
Displays the Command Rate (editable in
Manual Mode).
tCL
Displays the Column Address Strobe Latency
(editable in Manual Mode).