Grass Catcher - MTD 11A-41MY229 Operator's Manual

3_
The ropeguideisattachedtothe rightsideofthe upperhandle.
See Fig. 3-3. Loosen the wing nut which secures the rope
guide.
Figure 3-3
4_
a. Hold blade control against upper handle.
b. Pullstarterropeoutoftheengine.Release bladecontrol.
c. Slip starter rope into rope guide.
d. Tighten wing nut.
Insert post on cable tie into hole provided on the lower
handle. Pull cable tie tight and trim excess. See Fig. 3-4.
GrassCatcher
Followsteps belowtoassemblethegrasscatcher.Makecertain
bag is turned right side out before assembling (warning
label will be on the outside).
a. Place bag over fra me so that its black plastic side is
at the bottom.
b. Slip plastic channel of grass bag over hooks on the
frame. See Fig. 3-5. All the plastic channels except
center top of bag attach from outside of bag.
f
Figure 3-5
c. Attach center top of bag from inside of bag.
(
Figure 3-4
SECTION
3 -- ASSEMBLY& SET-UP 9