Table of Contents
Advertisement
Quick Links
Operator's Manual
Single-Stage
Snow Thrower
Models
262
$235
$265
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered,
brush-
covered or grass-covered
land unless the engine's exhaust system is equipped with a spark arrester meeting applicable
local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department,
P.O. Box 361131
Cleveland, Ohio 44136-0019.
MTB LLC, P.O. BOX361131CLEVELAND,OHIO44136-0019
PRINTED IN U.S.A.
FORM NO. 769-01200,
(5/21/2004)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MTD 262
Summary of Contents for MTD 262
- Page 1 Operator's Manual Single-Stage Snow Thrower Models $235 $265 IMPORTANT: Read safety rules and instructions carefully before operating equipment. Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush- covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if...
-
Page 2: Customer Support
TABLEOFCONTENTS Content Page Content Page Maintenance Customer Support Important Safe Operation Practices Service & Adjustments Accessories & Kits Assembly Controls Illustrated Parts List Operation Warranty Back Cover FINDINGMODELNUMBER This Operator's Manual is an important part of your new snow thrower. It will help you assemble, prepare and maintain the unit for best performance. -
Page 3: Section 1: Important Safeoperation P Ractices
SECTION 1: IMPORTANT SAFEOPERATION P RACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol--heed its warning. - Page 4 6. Donot o perate m achine while under theinfluence of Maintenance AndStorage alcohol ordrugs. Never tamper with safety devices. Check their proper 7. Muffler and engine b ecome hot a nd can cause a burn. D o operation regularly. not t ouch. Disengage the control handle and stop engine.
-
Page 5: Section 2: Assembling Your Snow Thrower
SECTION 2: ASSEMBLING YOUR SNOW THROWER NOTE: This Operator's Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models. Contents of Carton Carton contents are listed below: •... -
Page 6: Section 3: Know Your Snowthrower
SECTION 3: KNOW YOUR SNOWTHROWER Chute Handle Starter Handle* Discharge Chute Spark Plug Cover Fuel Cap Choke Lever Ignition Key Upper Handle /_EI er Plu Electric Starter Button Shave Plate (If So Equipped) Auger Control Handle (If So Equipped) Auger * Styles vary by model Figure I IMPORTANT:This unit runs on a mixture of gasoline... -
Page 7: Section 4: Operating Y Our Snow Thrower
SECTION 4: OPERATING Y OUR SNOW THROWER read, understand, and follow all instructions WARNING: Before starting engine, and warnings on the machine and in this manual before operating. FuelAndOilMixture WARNING: extreme care when handling gasoline. Gasoline extremely flammable and the vapors are explosive. -
Page 8: Section 5: Making Adjustments
SECTION 5: MAKING ADJUSTMENTS NOTE: On new units or units with a new shave plate installed, the augers may be slightly off the ground, adjustments while the engine is running. WARNING: NEVER attempt to make any • To adjust, tip the snow thrower back so that it rests Control C able&... -
Page 9: Section 7: Off-Season S Torage
NOTE: Call 1-800-800-7310 for information regarding price and availability of Shave Plate Kit 753-0451 or contact an authorized MTD Service Dealer in your area. • Remove the four carriage bolts and hex lock nuts which secure it to the snow thrower's auger housing. -
Page 10: Section 8: Troubleshooting
Check for possible damage. Tighten all bolts and nuts. Repair as needed. If the problem persists, take unit to an authorized MTD service dealer. Unit fails to self-propel Drive belt damaged Inspect the drive belt for damage and replace if necessary as instructed on page 8 of this manual. -
Page 11: Section 9: Accessories & Kits
The following accessories and kits are available for single-stage, two-cycle snow throwers. See the retailer from which you purchased your snow thrower, an authorized MTD Service Dealer or phone (800) 800-7310 for information regarding price and availability. DESCRIPTION MODEL 0EM-390-996... -
Page 12: Section 10: Parts List
SECTION 10: PARTS LIST... - Page 13 Models262, $235 & $265 REF. PART REF. PART DESCRIPTION DESCRIPTION 684-04027A 710-1003 Auger Assembly Complete, 21" Hex Cap Screw, #10-16 x .625" 684-04025 712-0252 Hex Nut, 5/8-32 x .12 Auger Weldment Assembly, 21" 710-0896 712-04063 Self-tapping Screw, 1/4-14 x 0.625" Hex Flange Lock Nut, 5/16-18, Gr.
- Page 14 NOTES...
- Page 15 NOTES...
- Page 16 MANUFACTURER'S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD LLC with MTD does not extend any warranty for products sold or respect to new merchandise purchased and used in the exported outside of the United States, its possessions United States, its possessions and territories.
Need help?
Do you have a question about the 262 and is the answer not in the manual?
Questions and answers