Table of Contents
Advertisement
Quick Links
Operator's Manual
IMPORTANT:
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131
Cleveland, Ohio 44136-0019.
PRINTED IN U.S.A.
Read safety rules and instructions carefully before operating equipment.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Single-Stage
Snow Thrower
Models 262
FORM NO
S235
S265
. 769-01200.fm
(5/21/2004)
Advertisement
Table of Contents
Related Manuals for MTD 262
Summary of Contents for MTD 262
-
Page 1: Snow Thrower
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 PRINTED IN U.S.A. Single-Stage... -
Page 2: Customer Support
You can locate the model plate by standing behind the unit and looking at the rear of the snow thrower frame. This information will be necessary to use the manufacturer’s web site and/or help from the Customer Support Department or an authorized service dealer. MTD LLC P. O. BOX 361131 CLEVELAND,OH 44136 330-220-4683 www.mtdproducts.com... -
Page 3: Section 1: Important Safe Operation Practices
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—heed its warning. -
Page 4: Maintenance And Storage
Do not operate machine while under the influence of alcohol or drugs. Muffler and engine become hot and can cause a burn. Do not touch. Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic. Exercise caution when changing direction and while operating on slopes. -
Page 5: Section 2: Assembling Your Snow Thrower
SECTION 2: ASSEMBLING YOUR SNOW THROWER NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models. Contents of Carton Carton contents are listed below: •... -
Page 6: Section 3: Know Your Snow Thrower
SECTION 3: KNOW YOUR SNOW THROWER Chute Handle Starter Handle* Shave Plate Auger * Styles vary by model This unit runs on a mixture of gasoline IMPORTANT: and oil. Do NOT operate the snow thrower without first reading the Tecumseh engines operator’s manual for instructions regarding proper fuel and engine oil. -
Page 7: Section 4: Operating Your Snow Thrower
SECTION 4: OPERATING YOUR SNOW THROWER WARNING: Before starting the engine, read, understand, and follow all instructions and warnings on the machine and in this manual before operating. Fuel And Oil Mixture WARNING: Use extreme handling gasoline. Gasoline is extremely flammable and the vapors are explosive. -
Page 8: Section 5: Making Adjustments
SECTION 5: MAKING ADJUSTMENTS WARNING: NEVER attempt to make any adjustments while the engine is running. Control Cable & Belt Tension As a result of both the control cable and the drive belt stretching due to wear, periodic adjustments may be necessary. -
Page 9: Section 7: Off-Season Storage
Pulley NOTE: Call 1-800-800-7310 for information regarding price and availability of Shave Plate Kit 753-0451 or contact an authorized MTD Service Dealer in your area. • Remove the four carriage bolts and hex lock nuts which secure it to the snow thrower’s auger housing. -
Page 10: Section 8: Troubleshooting Guide
Check for possible damage. Tighten all bolts and nuts. Repair as needed. If the problem persists, take unit to an authorized MTD service dealer. Inspect the drive belt for damage and replace if necessary as instructed on page 8 of this manual. -
Page 11: Section 9: Accessories & Kits
SECTION 9: ACCESSORIES & KITS The following accessories and kits are available for single-stage, two-cycle snow throwers. See the retailer from which you purchased your snow thrower, an authorized MTD Service Dealer or phone (800) 800-7310 for information regarding price and availability. -
Page 12: Section 10: Parts List
SECTION 10: PARTS LIST 27 22... - Page 13 Models 262, S235 & S265 REF. PART DESCRIPTION 684-04027A Auger Assembly Complete, 21" 684-04025 Auger Weldment Assembly, 21" 710-0896 Self-tapping Screw, 1/4-14 x 0.625” 735-04032 Rubber Spiral 735-04033 Rubber Paddle 684-04126 Auger Housing Assembly 21” 710-0134 Carriage Bolt, 1/4-20 x .62”...
- Page 14 NOTES...
- Page 15 NOTES...
- Page 16 MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. “MTD”warrants this product against defects in material and workmanship for a period of two (2) years commencing on the...