Trimmer Maintenance; Cleaning And Maintenance; Replacement Parts; Battery Disposal And Recycling - Remington RM40BST Owner's Manual

TRIMMER/EDGER MAINTENANCE
CLEANING AND ._
MAINTENANCE _Ib
WARNING:
Use of non=Remington parts or
WARNING:
Remove battery before cleaning
or servicing. Severe injury or
death could occur from fire, elec=
trical shock, or rotating string.
A WARNING"
When cleaning trimmer/
edger:
• Do not submerse in any
liquids
• Do not use products that
contain Ammonia, Chlo=
fine, or abrasives
• Do not use chlorinated
cleaning solvents, Carbon
Tetrachloride, Kerosene, or
Gasoline.
accessories may cause personal
injury or damage to the unit.
REPLACEMENT PARTS
1. Battery 725-05032
2. Battery Charger 725-05031
3. Replacement Spool 731-07483
(Includes line)
BATTERY DISPOSAL AND
RECYCLING
This product uses nickel-cadnium batteries.
Local, state_ or federal laws prohibit disposal of
nickel-cadnium batteries in the ordinary trash.
To help protect the environment and conserve
natural resources, please dispose of batteries
properly. You may contact your local recy-
cling center for information on where to drop
off the batteries.
For original replacement parts and accessories_
call 1-866-206-2707 (in Canada call 1-877-
696-5533) or visit
www.remingtonpowertools .COlTI.
Use a soft cloth dampened with a mild soap and
water mixture to wipe trimmer/edger housing.
Do not spray or pour water directly onto trim-
mer/edger.
Use a stiff bristled brush to clean air intake
openings on housing (see Figure 31 ).
When not in use, store the trimmer/edger indoors
in a dry location.
Figure 31 = Cleaning trimmer/edger hous=
ing
11