Using The Snap-Shot Feature - Mitsubishi CS-40507 Owner's Manual

Using the Snap-shot feature
4
PAUSE
®
A _"
(_ Use Advanced PIP
b' Current setting :
Snap-shot
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
Advanced Features Menu.
ooo0
:_d04=
_000_
€_O00Q
c_OOOU
if the PIP image is off
[]
[]
B
PAUSE
®
O Select "Use Advanced PIP" in
the "Advanced Features" menu
and set it to "Snap-shot." (See
"Selecting ;an advanced PIP
function," page 79.)
O Use the MENU button 1;oreturn
to the normal picture.
Press the PAUSE button once;
a frozen P][P image and a
moving PIP image will appear.
O
Press tbe PAUSE button again;
a third ]?IP image will appear,
moving. The previous two PIP
images will be frozen.
O Each tilne, you press the
:PAUSE button, the PIP images
will shift upwards one by one:
Lhe top image will be replaced
by the second image, the second
image will be replaced by the
third, and a new moving image
will appear in the third space.
To cancel the PIP image, press
the PIP button twice.
C
PAUSE
®
D
if the PIP image is on
PAUSE
®
B
PAUSE
®
[]
[]
[]
C
PAUSE
®
D
*A, B, C, D: the moving images
*a, b, c, d: the frozen images of A, B, C, and D at the instant the PAUSE
button is pressed.
I
Using the Advanced Picture-in-Picture (PIP) Modes 91