Miele G 858 SCVi Operating Instructions Manual page 40

Frequentny asked questions
What if ...
after a program has
ended, the optic
indicator and the
program indicators
flash?
Possible fault
There may be a technical
faulL
there is a knocking
noise in the water
_es?
dishes are not dry,
glasses and cutlery are
spotted?
there is a knocking The spray arm is hitting
noise in the wash an item in the basket.
cabinet?
there is a rattling noise? kems are not secure in
the wash cabinet.
This may be caused by
the installation or the
diameter of !_joe,
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon,
Fix
- Turn the dishwasher off.
Despite the problem the
dishwasher can be used.
If the indicators flash
again after the next
program cycle, call the
Miele Technical Service
_artment.
Interrupt the program,
rearrange items blocking
arms.
Interrupt the program and
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see
"Before using for the first
time".
Leave dishes in longer.
4O