Setting Up The Monitor; Attaching The Base; Connecting The Monitor - Dell IN2020M User Manual

Dell IN2020/IN2020M Flat Panel Monitor User's Guide
Back to Contents Page

Setting Up the Monitor

Dell™ IN2020/IN2020M monitor User's Guide

Attaching the Base

Connecting the Monitor

Attaching the Soundbar (Optional)
Removing the Monitor Stand
Attaching the Base
NOTE:
The stand is detached when the monitor is shipped from the factory.
After placing the monitor panel on a soft cloth or cushion, complete the following steps to attach the base.
1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.
Connecting the Monitor
CAUTION: Before you begin any of the procedures in this section, follow the
To connect your monitor to the computer perform the following steps/instructions:
file:///C|/Users/santhosh_v/Desktop/UG_en/setup.htm[3/27/2013 12:21:01 PM]
safety instructions.