Removing The Monitor Stand - Dell IN2020M User Manual

Dell IN2020/IN2020M Flat Panel Monitor User's Guide
1. Working from the rear of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack or the monitor's audio output jack.
NOTICE: Do not use with any device other than the Dell Soundbar.

Removing the Monitor Stand

file:///C|/Users/santhosh_v/Desktop/UG_en/setup.htm[3/27/2013 12:21:01 PM]