with a soft, damp
cloth. Do not use abrasive substances.
any stains (such as cray-
on, ink pen or fabric dye) with an all purpose
or rags to
stain or cleaning
- wipe off any marks with soap and water.
Use an appliance
wax once a year if desired.
mance. The outside
hood should be cleaned
to ensure proper operation.
for more information.)
.......... ,.,,o,.., ......... ....
the dryer from the elec-
trical power supply.
2) Open the door and use a Phillips
remove the screw attaching
the lens to the tum-
lens cover by pulling
center of tumbler.
Rotate bulb counter-clockwise
the bulb with a 120 volt, 10 watt
base light bulb.
6) Turn the light bulb clockwise
7) Replace lens cover by hooking
plastic tabs into
tumbler front below the light housing.
the screw into the lens cover screw
dryer to power supply.
Door.... .......... .°... ............ ... ...........
the dryer door.
the hinge hole covers and screws. Move the door catch cover to the opposite
2) While supporting
the door, remove 2 screws in the hinges that secure the hinges
to the cabinet.
door by lifting slightly
at the hinges and pulling
the hinge tabs out of the hinge slots.
4) Move the following
parts to the opposite
side of the door: 2 hinges
and 4 hinge screws, 4 door screws,
door strike and screw, inner door cover plate and screw.
5) Attach the door to the opposite
side of the cabinet using the 2 counter
sunk hinge screws. (See below).
Screw the lower hinge screw in first. This will help to align the door and hinges.
6) Replace the hinge hole covers to the opposite
Counter Sunk Screw _