Advertisement
w
ow that you have looked up
the two-digit Remote Code
Number for your brand of Cable
Converter (on previous page),
you are ready to follow the four
simple steps below.
Please read through
steps 1-4
before beginning.
[BEGINJ
_.'[_
Press and release the REC
I (RECORD) button.
_2_
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
<,_5._ Within thirty seconds after
releasing the CBL System
button, ENTER THE TWO
DIGIT CODE NUMBER for
the desired Converter. The
remote is now ready to send
commands to the Converter.
<<_j> Point the remote at the
Converter. Press the POWER
button on the remote to turn the
Converter ON.
O
Try it out. The Channel and
POWER buttons on the remote
hould now operate the
onverter.
•
Remember. If this doesn't
ork the first time, repeat
steps using the same remote
code number.
If after a second try the remote
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated attempts the
code number method does not
work your Converter, try the
"CONVERTER SEARCH"
method on page 29.
Cable Converter
I
l
FrAY _,-
STATUS
PAUSE II
27
Advertisement
