Advertisement
After installing the batteries into
the remote, press the TV System -
button to send remote commands
to the TV. Point the remote toward
the front of the TV (remote sensor
window) when pressing buttons.
V_R Buttons
For use of VCR buttons see the "Using
the Remote With a VCR".
M_nu (VA) Buttons
Press the M button to show on-screen
feature controls. Press • or • buttons
to rnove forward and backward
through the list of on-screen controls.
0
pnd (+) Buttons
Press to adjust the selected on-screen
feature control.
Vohlm.q.lhal._m
Press to adjust the TV sound level.
Reset/Enter
Button
Press to return the TV to factory prese_
levels for picture controls. Also can be
used as an Enter button when sending
channel commands to remote
controlled cable converters or VCRs.
1Nember Buttons
Press the number buttons to select TV
channels. Press two number buttonsto
select single digit channels. For
example: to select channel 6...press
"0" first and then "6".
f
/
/
PLAYW
STATUS
_
PAUSEII j_/
_l
+%.
_;tatus Button
Press to see the current channel
number on the TV screen. Also press
this button to clear the TV screen after
control
adjustments.
Alternate
Channel
Button
Press to select the previously viewed
channel.
For example: You are watching
channel 4 and change to channel 10
(using the channel number buttons).
Press AJCH and your "IV will return to
channel 4. Press A/CH again and your
TV will return to channel 10.
Channel
Scan Button
Press to scan up or down through
channel numbers.
-Mute Button
Press to turn the sound OFF on the
"IV. Press again to return the sound to
its previous level.
TV-VCR-CBL System
Buttons
Press to send remote control commanc
to either the TV, VCRs, or accessory
Cable Converters. See the "How to
operate VCRs and Cable Converters"
section for further details.
Power Button
Press to turn the TV (VCR or Cable
Converter) ON and OFF.
Jm+
The remote's TV-VCR-CBL System
buttons control how certain buttons on the
remote are used.
For example:
With the "TV" System button pressed:
the MENU, (M)AV, and (+,-)
buttons are used to select and
adjust on-screen "IV features.
With the "VCR" System button pressed:
the same buttons on the remote work
playback, search, pause, and other
VCR features.
.dl
22
Advertisement
