Advertisement
ou can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the
playback of a VCR tape:
[ BEGIN
]
_
Connect the AUDIO and
VIDEO INPUT jacks on the TV
to the AUDIO and VIDEO
OUTPUT jacks on the VCR.
_,'_
Press MENU • or • on the
TV (or on the remote press M
button and then M ••
buttons.)
Select the word INPUT with the
TV's on-screen Arrow.
J_
_,3_
Press (+) or (-) button to
i select the gCR/AUX(iliary)
INPUTS on the rear of the TV.
_,_,_
Turn the VCR ON and PLAY
the VCR tape to be viewed on the
TV.
0
Remember! When you're
ugh using the A/V INPUT
jacks, return the INPUT display
screen on the TV to ANT(enna).
Then you will be ready to view
TV programs coming from the
normal antenna aonnections.
If you leave the TV in the
VCR/AqX
INPUT mode and
there is no signal source
connected to the jacks, you will
be seeing only a blank screen on
the TV.
NOTE: If you have a mono
(single audio OUTPUT) VCR,
"Y" Connectors are available
(from your dealer or Parts
Information Center 1 800 292-
6066) to connect the mono audio
to both R and L audio inputs on
the TV.
75
OHM
BACK OF TV
\
VIDEO OUT
AUDIO OUT
(RED/WHITE)
®
VIDEO
OUTDOOR
UHF/VHF
ANTENNA
CABLE TV
SIGNAL
PICTURE AND SOUND
FROM PLAYBACK
OF
VCR TAPE
i!i!iii!::
=888
21
Advertisement
