Philips 64PH9905 Instructions For Use Manual page 9

_llinvergence
is the correct
ning up of the red and blue
light paths on the DPTV screen.
NOTE: If no color frit_gittg (see
Smart Help) shmvs, then no
Convergence
adjustment._ are
It('('essary.
Select CONVERGENCE
control.
With PICrURE MENU (2 of 2)
on-screen, move the I_ED highlighl
with the MENU 4_ buttons. Then
press the MENU button.
<_ Press the MENU _kT buttons
to select either the Red or Blue
Convergence control, press the
MENU button to continue_
_ Press the MENU
_o_ buttons
to move the selected r_l (or blue)
convergence cross directly over the
white'cross on the DPTV screen.
Remember, Convergence
_has been set at the factory for
best viewing, but if One or more of
..
. ANALOG MNN MENU
L
ii;iiiiiiii!iliiiiiiii
R£ MENU '
: =, 1 'OP'2 I, ':L'_
l
--= pICTURE MENU
% , J, n *1 . _
20F2--
,1
CONVERGENCE MENU
ALIGN BLUE
CONVERGE MULTI POINT
BACK
l
÷
PRESS 4_ TO ALIGN RED
PRESS MENU TO RETURN
V
NOTE: Adjusmlents for "Multi-Point" on- I
screen color fringing c_ also be nlade as pan
of the DI'TV's Convergence control system
Follow the on screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These muhi-point
settings can then be "Saved" to memory for
the specific areas of the DPTV screen (or
Factory Settings for convergence can be
recalled and put back into place for use).
_,IULTI-POINT CONVERGENCE CONTROLS
[........ ll
| _'o_ __
• ,_=_'V"_,,,_ + + + +
+ c+_ + +
++++