Philips 64PH9905 Instructions For Use Manual page 46

parental Control allows parents
to block out. or censor, arty
channels they think children should
not watch. A channel placed uJzder
Parental Control cannot be viewed
until a correct access code is used to
unlock the channel for viewing.
First let's set your Parental Code:
Select the PARENTAL
CONTROL.
With FEATURES MENU on screen,
move the RED highlight with the
MENU 4_) buttons. Then press the
MENU (or ok) button.
"CHANNEL BLOCKING" and
"SETUP CODE" show on screen.
_
Press the MENU AT and
MENU (or ok) buttons t_ highlight
and select the sETuP CODE item.
_> Press 0, 7, 1, 1 on the remote.
ACCESS
NOTE:Your TV Left the factory with the Parental Code set to "0000". If you are using your _and
the Parental Control for the first time, and don't want to SETUP a new Access code number, you can
use the "0000" number to block channels - see next page.
The "071 I" Parental Code (shown on Ihis page) is given as a default or way to reset the Code when
the current Access number is not known, Also. once set, the same Access Code Number will apply
for the use and operation of the Parental Cnnlrol system found in both the NTSC/Analog and the
ATgC/Digital Feature Menu control are_ls.
t
r ......................
Press MENU l_ to go on and start
to "block" channels
Press MENU • to go to "Content
Advisory" (or TV and Movie Ratings
system of channel blocking).
Press/',J ENU to return to the Parental
Control Menu Sel'ecn
Prtss STATUS to clear the screen
Parents - it isn't possible
_ii to unlock or defeat your
Censor Code without changing to
46