Philips 64PH9905 Instructions For Use Manual page 29

Tie Pronto remote contains
hree display screens of
"Analog TV" related controls. Use
the touchscreen
conlrols to access
and adjust NTSC featares for Input
selection attd Menu feature
adjltstmeals.
Note: For battery installation and
other details on the initial use of
the Pronto remote conlrol also
refer to the 64PH9905 Quick Use
guide included with your DPTV.
Gently tap the Pronto
touehscreen with your finger to
displa_ its control panel for use.
?
setec ed the
Due to the amount of
optional component and
alternate audio
F Primari[y used for "all audio" ATSC mode
feature, this button can also be used to
quickly select the NTSC Second Audio
Program (SAP) feature (when available)
Press ;o lure the DIrFV ON and OPI 7
, volume buttons
Press to adjust the DP I V sound level up t÷! and dol_n ( )
Press to set the DPTV to
automatically turn itself OFF
( 15 minutes to 2 hours ahead)
Press Alternate Channel (A/CH) to select previously
viewed channels Enter the desired two channel numbers
(from the Pronto remote's numher buttons), and then
press A/OH to toggle back and forth between the two
channel selections
Press to clear the DPI_? scr_n after control
adjustments, Also press Io see the currenl channel
number on the DPTV screen.
Press Io select one of the TV screen display format modes
0.e Panoramic, 4:3, 16:9. etc )
Press the nunlher butlons to selecl DPTV channels Press
number butlons to select single digil '+major" ch_mncl
numbers. For example: press "0" Ihen "6" for channel h.
scroll arrows
/
Press to move to the next (or previous) page of Pronto
controls. The touchscreen will display the current
control screen's page number, and the total number of
pages available for the selected device tl/3; 2/3; etc.)
,.. menu d_) buttons
Press the Menu (or ok) button to
show on+screen conLrols. Pr++_s 61
• or • buttons to move up (or
down), the M _1 or II_ to move
left (or dght) through the list ol
controls
2g