Table of Contents
Advertisement
Sound settings
Depending
on the audio outputs
being used, this menu provides
you with a selection
of settings
If you
are only using the
analog audio
outputs
(red
and white
OUT
L AUDIO
R,
OUT
AUDIO
LR jacks), select 'Of/' in the 'Digital
output
menu.
'Digital
outpu_
You
can select from
the following
settings
for
devices connected
to the
DIGITAL
AUDIO
OUT jack:
'All' : Dolby Digital signalsare going out unchanged to the digital output, MPEG-2 multi-channel
signalsare converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers with a digital multi-channel
sound decoder
'PCM
only'
: Dolby Digital and MPEG-2 multi-channel
signals are converted
to PCM (Pulse Code
Modulation),
For receivers/amplifiers
without
a digital
multi-channel
sound
decoder.
'Of/'
: digital output
is off
For devices with an analog
audio input,
'Analog
output'
You can select from the following settingsfor devices connected to the analog outputs ( OUT L
AUDIO R, OUT AUDIO LR ).
'Stereo'
:
For devices that use neither DolbySurround
nor TruSurround.
Only use this setting
when the DVD Recorder
is connected
to a stereo TV
'Surround'
:
Dolby Digital and MPEG-2 multi-channel
are mixed to a Dolby Surround-compatible
two-channel
output
signal
For devices with a Dolby
Surround
/ Pro Logic decoder.
S0UEd
Uigital output
E
]
Anal0goutput
[Stereo
]
Night n,0de
0r_
]
'Night
mode'
Night
mode optimizes the sound dynamics at low volume. This causes less disturbance
in quiet
environments. This setting only functions
with Dolby
Digital Audio
on DVDs.
User preferences
67
Advertisement
Table of Contents
